I knew that a deep purple would be a wonderful fall color so that was what I went searching for at the fabric store, but in a print.
1)Here are the supplies needed to make a one-shoulder shirt: fabric (three-quarters of a yard), measuring tape, pins, thread, elastic thread for shirring the bottom, scissors, and an existing t-shirt you have, chalk (my 3 year old's sidewalk chalk works just fine!)2) After washing and ironing your fabric lay the fabric right sides together then lay your t-shirt on top of it
3) Trace around your shirt - adding 2 or so inches along the sides and neckline and about 3 inches around the sleeve and making it a few inches longer in length. Also use the chalk to draw your line on the shirt from the neckline all the way across the the opposite sleeve under the armpit area. (since it is a one-shoulder shirt)
4) Cut out
5) Fold over the neckline to make a hem on both of the pieces (use the iron and pin as needed)
6) Sew both necklines using a straight stitch.
7) Place front and back of shirts right side together and pin. You will sew down the side that is sleeveless, then sew from the bottom of the other side up and around the armpit and lastly you will sew the other side of the sleeve up to the neckline where the shirts meet. (Don't sew the neckline together or the bottom of the shirt)
8) Trim and/or notch the seams where the sleeves are. This will make it lay better once you turn it right side out.
9) Turn it right side out. Now I folded (put in 3 small pleats) across the top. This gives it more interest and allows the shirt to have some movement. Try on your shirt and figure out how much it needs to "come in". I took in about 4 inches. Pin the pleats, iron them, then sew over them with a straight stitch to secure.
10) Repeat for the back of the shirt (Pleat, iron them, then sew over them with a straight stitch to secure)
11) Now it looks like a shirt! Cut one strip that will be a strap. Mine was 1.5 inches in width and about 14 inches long. Iron one side of the strip to the middle, then the other side to the middle and fold the strip in half. This will hide your edges. Sew along the edge.12) Put on your shirt and place a pin where you want the strap to go in the front and the back. Pin on the strap and sew in place.
13) To add more shape to the shirt I shirred 3 lines along the bottom of the shirt.